School of Specs 24.501v20.0.0

3GPP 24.501 v20.0.0 — the document's own text

9.11.3.6 5GS registration result

Taught in 4. Inside TS 24.501, the document at the centre (CT1 — the group that writes what your phone says, overview).

The purpose of the 5GS registration result information element is to specify the result of a registration procedure.

The 5GS registration result information element is coded as shown in figure 9.11.3.6.1 and table 9.11.3.6.1.

The 5GS registration result is a type 4 information element with a length of 3 octets.

87654321
5GS registration result IEIoctet 1
Length of 5GS registration result contentsoctet 2
0SpareDisaster roaming registration result valueEmergency registeredNSSAA PerformedSMS allowed5GS registration result valueoctet 3

Figure 9.11.3.6.1: 5GS registration result information element

Table 9.11.3.6.1: 5GS registration result information element

5GS registration result value (octet 3, bits 1 to 3) (NOTE)
Bits
321
0013GPP access
010Non-3GPP access
0113GPP access and non-3GPP access
111reserved
All other values are unused and shall be treated as "3GPP access", if received by the UE.
SMS over NAS transport allowed (SMS allowed) (octet 3, bit 4) (NOTE)
Bit
4
0SMS over NAS not allowed
1SMS over NAS allowed
Network slice-specific authentication and authorization is to be performed (NSSAA to be performed) (octet 3, bit 5) (NOTE)
Bit
5
0Network slice-specific authentication and authorization is not to be performed
1Network slice-specific authentication and authorization is to be performed
Emergency registered (octet 3, bit 6)
Bit
6
0Not registered for emergency services
1Registered for emergency services
Disaster roaming registration result value (octet 3, bit 7) (NOTE)
Bit
7
0No additional information
1Request for registration for disaster roaming service accepted as registration not for disaster roaming service
Bit 8 of octet 3 is spare and shall be coded as zero.
NOTE: All bits other than bit 6 in octet 3 shall be ignored by the UE when the 5GS registration result IE is received in the CONFIGURATION UPDATE COMMAND message