School of Specs 24.501v20.0.0

3GPP 24.501 v20.0.0 — the document's own text

9.11.3.2 5GMM cause

Taught in 4. Inside TS 24.501, the document at the centre (CT1 — the group that writes what your phone says, overview).

The purpose of the 5GMM cause information element is to indicate the reason why a 5GMM request is rejected.

The 5GMM cause information element is coded as shown in figure 9.11.3.2.1 and table 9.11.3.2.1.

The 5GMM cause is a type 3 information element with length of 2 octets.

87654321
5GMM cause IEIoctet 1
Cause valueoctet 2

Figure 9.11.3.2.1: 5GMM cause information element

Table 9.11.3.2.1: 5GMM cause information element

Cause value (octet 2)
Bits
87654321
00000011Illegal UE
00000101PEI not accepted
00000110Illegal ME
000001115GS services not allowed
00001001UE identity cannot be derived by the network
00001010Implicitly de-registered
00001011PLMN not allowed
00001100Tracking area not allowed
00001101Roaming not allowed in this tracking area
00001111No suitable cells in tracking area
00010100MAC failure
00010101Synch failure
00010110Congestion
00010111UE security capabilities mismatch
00011000Security mode rejected, unspecified
00011010Non-5G authentication unacceptable
00011011N1 mode not allowed
00011100Restricted service area
00011111Redirection to EPC required
00100100IAB-node operation not authorized
00101011LADN not available
00111110No network slices available
01000001Maximum number of PDU sessions reached
01000011Insufficient resources for specific slice and DNN
01000101Insufficient resources for specific slice
01000111ngKSI already in use
01001000Non-3GPP access to 5GCN not allowed
01001001Serving network not authorized
01001010Temporarily not authorized for this SNPN
01001011Permanently not authorized for this SNPN
01001100Not authorized for this CAG or authorized for CAG cells only
01001101Wireline access area not allowed
01001110PLMN not allowed to operate at the present UE location
01001111UAS services not allowed
01010000Disaster roaming for the determined PLMN with disaster condition not allowed
01010001Selected N3IWF is not compatible with the allowed NSSAI
01010010Selected TNGF is not compatible with the allowed NSSAI
01011010Payload was not forwarded
01011011DNN not supported or not subscribed in the slice
01011100Insufficient user-plane resources for the PDU session
01011101Onboarding services terminated
01011110User plane positioning not authorized
01011111Semantically incorrect message
01100000Invalid mandatory information
01100001Message type non-existent or not implemented
01100010Message type not compatible with the protocol state
01100011Information element non-existent or not implemented
01100100Conditional IE error
01100101Message not compatible with the protocol state
01101111Protocol error, unspecified
Any other value received by the mobile station shall be treated as 0110 1111, "protocol error, unspecified". Any other value received by the network shall be treated as 0110 1111, "protocol error, unspecified".