School of Specs 24.501v20.0.0

3GPP 24.501 v20.0.0 — the document's own text

9.11.3.105 Feature authorization indication

Taught in 4. Inside TS 24.501, the document at the centre (CT1 — the group that writes what your phone says, overview).

The purpose of the Feature authorization indication information element is to indicate whether the UE that is authorized to operate certain feature.

The Feature authorization indication is a type 4 information element with a minimum length of 3 octets and maximum length of 257 octets.

The Feature authorization indication information element is coded as shown in Figure 9.11.3.105.1 and Table 9.11.3.105.1.

87654321
Feature authorization indication IEIoctet 1
Length of Feature authorization indication contentsoctet 2
00000HPASEMBSRAIoctet 3
SpareSpareSpareSpareSpare
Spareoctet 4octet n

Figure 9.11.3.105.1: Feature authorization indication information element

Table 9.11.3.105.1: Feature authorization indication information element

MBSR authorization indication (MBSRAI) (octet 3, bit 1 to bit 2)
This field indicates whether UE is authorized or not to operate as an MBSR node
Bits
21
00no information
01not authorized to operate as MBSR but allowed to operate as a UE
10authorized to operate as MBSR
11spare
High priority access service area restriction exempt (HPASE) (octet 3, bit 3)
This field indicates the operator policy for high priority access exemption for service area restrictions
Bit
3
0High priority access UEs are exempt from service area restrictions or the network does not support operator policy for high priority access exemptions for service area restrictions
1High priority access UEs are not exempt from service area restrictions
Bits 4 to 8 of octet 3 are spare and shall be coded as zero.